FW Murphy Engine Panels

Murphy builds panels - lots of panels. With an in-house industrial panel design and fabrication department, Murphy can offer a quick turnaround for custom panel solutions. RJ Mann & Associates, Inc. provides basic Panel Kits, Swichgage® Shutdown Panel Kits and state-of-the-art control panels designed for modern electronic engines and equipment applications using SAE J1939 Controller Area Network (CAN). Several accessories are also stocked to fully equip or repair your existing panels. FW Murphy builds other models that are not shown here. Please contact RJ Mann & Associates, Inc. inside sales to see which models are currently available.

Whether you have irrigation engines, mobile construction equipment or industrial engines, Murphy has a Swichgage® Shutdown Panel Kit that will meet your specific needs. Our panels are designed for many of the most common applications where annunciation and/or engine shutdown is crucial. Our Panel Kits are economical and easy to install and use - and they will help keep your engines safe.

 

75160 Series: Swichgage® Shutdown Panels for Irrigation Engines & Pumps

murphy.75160This Swichgage® panel is specifically configured for irrigation engines and includes a loss of pump discharge pressure Swichgage® instrument. The panel is enclosed on top, bottom, and both ends. Mounting flanges extend on top and bottom. The back of the panel is open. Access holes are in the bottom.

75160: includes low oil pressure, high coolant temperature, low pump pressure Swichgage® instruments, Magnetic Switch, and emergency stop button.

75160D: includes SV-series solenoid diesel fuel valve (specify voltage). For diesel engines without shut-down solenoid in the injection pump, add a Murphy SV Series solenoid fuel shut-off valve or RP2300 Series rack pull solenoid.

Panel Kits Include:
• Low lube oil pressure Swichgage® instrument
• High coolant/ temperature Swichgage® instrument
• 518PH magnetic switch
• SV Series solenoid fuel shutoff valve
• PB128S emergency stop push button

Features

• Ideal for Irrigation Engines
• Includes Loss of Pump Discharge Pressure and High Coolant Temperature Swichgage® Instruments
• Model With Solenoid Fuel Shutoff Valve

Literature

• Sales Bulletin (pdf)

WAI Series: Swichgage® Shutdown Panels for Mobile Equipment of All Kinds

murphy.WAI7WAI Series Murphy panels offer engine protection for on and off road mobile equipment. You get accurate engine readings and time-delayed automatic shutdowns. Flashing light and mini-siren signal a warning before the shutdown. Alarm-only panels (without shutdown capabilities) are also available. WAI panels are easy to install and function test without the need for expensive auxiliary equipment. Each is a cost competitive and effective system for engine protection.

The WAI Series Panels are complete diagnostic, engine-protection systems. Any vehicle or engine can be monitored, and in case of potentially damaging conditions an alarm will operate before the engine is shut down. WAI Panels feature direct-reading, mechanical Swichgage® instruments (gauge and limit switch in one) and Selectronic® relays and alarms. Swichgage® instruments are internally lighted for night illumination.

Features

• Get the same original equipment specified by major OEM’s
• Swichgage® instruments include built-in light pipe illumination
• Pre-wired and ready to install
• Alarm only model saves money on applications not requiring shutdown
• Available for 12 or 24 volts

Models Available

WAI-2: Completelly enclosed and with convenient under-dash mounting provides Swichgage® instruments for low oil pressure and high coolant temperature; visual and audible alarms before automatic shutdown. Includes a 270° pivoting, mounting bracket.
WAI-3: Same as WAI-2 panel with a 3rd Swichgage® instrument for block coolant pressure (0-15 psi).
WAI-4: Same as WAI-2 panel with a 3rd Swichgage® instrument for transmission temperature (140-300°F).
WAI-7: Open style panel same as WAI-2.
WAI-8: Open style panel provides Swichgage® instruments for low oil pressure, coolant pressure and high coolant temperature; visual and audible alarms before automatic shutdown.
WAI-9: Open style panel same as WAI-8 with transmission temperature Swichgage® instrument instead of coolant pressure.
WAI-271: Open style panel similar to WAI-7 but for alarm-only.

Applications

Trucks, buses, fork lifts, loaders, earthmovers – any engine powered mobile unit, such as delivery vans, farm and construction equipment, street sweepers.

Literature

• Sales Bulletin (pdf)
• Installation Instructions (pdf)

WD100 Series: Swichgage® Kits for Engines

murphy.WD100The WD100 Series Swichgage® kits provide engine monitoring that shuts down farm, construction, or other engine powered equipment, when dangerous pressures or temperatures occur. The control center for each of these kits is the compact and adjustable, Universal Mounting Panel.

This panel holds two Swichgage® instruments, a Tattletale® magnetic switch, and shut down device where appropriate. Murphy Swichgage® products are two-instruments-in-one: (1) an accurate indicating gauge with (2) a built-in, adjustable, limit switch. The 518PH Tattletale® magnetic switch is designed to shut down engines. It operates as a circuit breaker to interupt the ignition circuit to a distibutor or to close a solenoid fuel valve on diesels.

Temperature capillary tubes are 6 ft. (1.8 m) standard, but can be ordered in any length.

Standard Swichgage® ranges*:
     Pressure: 0-100 psi (0-689 kPa) [0-6.89 bar]
     Temperature: 100-250°F (37-121°C)
*Other ranges are available on request.

Features

• Universal Mounting Panel
• Guard against low oil pressure or high running temperature
• For farm or construction equipment

Literature

• Sales Bulletin / Installation Instructions (pdf)

WD300 Series: Swichgage® Shutdown Panels with Open Back for Diesel Engines

murphy.WD300The universally applicable WD300 Series panels are the ideal control solution for a wide variety of diesel engines without shutdown solenoid in the injection pump. The standard WD300 Series panel includes basic engine protection for low oil pressure and high coolant temperature. It also includes Murphy’s SV Series solenoid fuel shut-off valve.

WD300LV Models
For engines that have the fuel shut-off solenoid built into the injection pump. This model also applicable to battery ignition engines.



Panel Kits Include:
• Low lube oil pressure Swichgage® instrument
• High coolant/ temperature Swichgage® instrument
• 117PH magnetic switch
• SV Series solenoid fuel shutoff valve
• PB128S emergency stop push button

Features

• Universal design ideal for diesel engines without fuel solenoid built into the injection pump
• Swichgage® instruments for low oil pressure, high coolant temperature
• Includes fuel solenoid shutdown valve

Literature

• Sales Bulletin (pdf)
• Installation Instructions (pdf)

WDU Series: Electric Gage Shutdown Panels for DEUTZ 1011/2011, 912/913/914

murphy.WDU0816The panels are designed to complement Deutz engines supplied with pre-installed factory-set "electric switched senders". Protection against low oil pressure and high engine temperature is achieved with the Murphy 760A Time Delayed Magnetic Switch. A panel mounted 10 amp fuse protects the sensitive instrumentation from any over-current situation and stops the engine if blown. The Deutz pre-installed "electric switched senders" supply all shut-down signals directly to the Murphy 760A providing reliable and proven engine protection in harsh environments.

Critical engine information is provided with Murphy’s environmentally sealed, LED illuminated "EG Series" electric gages. Known for their reliable performance and constructed of corrosion resistive materials, these rugged gages exceed SAE J1810 standards for use in tough off-road and industrial power unit applications. A unique spin-on gage clamp keeps the gages tight even in high vibration applications. Murphy’s alternator driven ATHA 4000 RPM tachometer provides accurate display of engine speed with its back-lit dial, while the digital hour meter records the elapsed engine run time. The heavy duty key switch constructed of corrosion resistant materials and heavy gauge wiring exceed the current requirements of the starter and engine pre-heat circuit. A red lamp mounted on the front panel indicates when the pre-heat circuit is active.

All components are assembled into a robust black powder-coated enclosure with text indicating key position. The "Plug and Go" external wire harness connects to the rear of the panel and has all the engine side connections pre-wired. The panel mounting bracket comes pre-assembled to the enclosure with three vibration isolators, making installation fast and simple.

Features

• Oil pressure gage: 0-80 PSI (0-500 kPa)
• Engine temperature gage: 140-300°F (60-150°C)
• Volt meter (8-18 VDC)
• Tachometer/Hourmeter (0-4000 RPM)
• Key Switch (heavy duty)
• Engine preheat with red indicator lamp
• Murphy 760A Safety Shutdown (automatic time delayed for start-up)
• Panel-mount fuse
• Recessed and protected front panel
• Durable powder coat finished enclosure and mounting bracket

Labor-Saving Installation Features

• Pre-wired external harness (includes all connectors and terminals)
• Mating connectors match Deutz engine wiring for fast "plug and go" connection
• Pre-assembled: enclosure, rubber isolation mounts and mounting bracket
• Simple bolt-on/plug-in installation

Literature

• Sales Bulletin (pdf)

W0168 and W0241: Swichgage® Shutdown Panel Kits

murphy.W0168The W0168 and W0241 panel kits are universal-fit instrument panels for most industrial engines. They include Swichgage® protection for low engine oil pressure and high coolant or high oil temperature. These panel kits are similar–the W0168 has a start/stop key switch and the W0241 has a start push button.

A 518PH magnetic switch provides a closed-loop circuit to ensure proper operation at all times. The 518PH allows the system to be sensitive to open circuits, broken wires, false grounds, corrosion, loss of power and other factors which could otherwise prevent the protective controls from operating. It can be wired to either make or break a circuit for shutdown. Swichgage® instruments are two-instruments-in-one: (1) an accurate indicating gage with (2) a built-in, adjustable limit switch.

The universal mounting panel is enclosed on all 4 sides with open back. An optional back cover (Model # 30050800) is available for both kits. Panel kits are prewired, ready to install and are available for 12 or 24 VDC systems.

Panel kits include:
• Low lube oil pressure Swichgage® instrument
• High coolant/oil temperature Swichgage® instrument
• 518PH magnetic switch
• Emergency stop push button
• Ignition key switch for start/stop (W0168)
• Push button for start (W0241)
• Ammeter 60-0-60
• Provisions for other Swichgage® controls: irrigation pump pressure or engine oil temperature
• Provisions for tachometer and throttle cable

Features

• Protection against dangerously low oil pressure or high temperature
•  Closed-loop circuitry ensures proper operation at all times
• Operates on 12 or 24 VDC systems
• Complete kit ready for easy installation
• Universal mounting panel

Literature

• Sales Bulletin (pdf)

MurphyLink™ Series M110 Panels

murphy.M110The MurphyLink™ M110 panel represents the “next generation” of Murphy panels. It comes with the PowerView™ System already installed. It is available in an enclosure or stand-alone flat panel option that can be dropped into a dash. This basic panel contains a key switch, increment/decrement throttle and the PowerView™.

The PowerView™ is a powerful new display, manufactured as part of Murphy's J1939 MurphyLink™ Family. PowerView™ products have been developed to meet the needs for instrumentation and control on electronically controlled engines communicating using the SAE J1939 Controller Area Network (CAN). The PowerView™ displays over 30 standard SAE J1939 parameters broadcast by major engine and transmission manufacturer’s ECU’s. It also displays active faults and ECU-stored faults with a text description on the most common faults for diagnosing equipment malfunctions.

The MurphyLink™ M110 panel includes:
• PowerView™ display, using the SAE J1939 controller area network
• Key switch
• Increment/decrement throttle switch
• Two fuses
• Deutsch connectors
• Shock-mounted
• Black powder-coated enclosure

Available options:
• Mounting kits (surface or recessed)
• Enclosed design or flat panel option
• Standard harnesses available for most major engine manufacturers ECU's: 6' (1.8 m) & 12' (3.6 m)

Literature

• Sales Bulletin (pdf)

MurphyLink™ Series M310 Panels

murphy.M310The MurphyLink™ M310 panel represents the “next generation” of Murphy panels. It comes with the PowerView™ System already installed. It is available in an enclosure or stand-alone flat panel option that can be dropped into a dash. This basic panel contains a key switch, increment/decrement throttle and the PowerView™.

The PowerView™ is a powerful new display, manufactured as part of Murphy's J1939 MurphyLink™ Family. PowerView™ products have been developed to meet the needs for instrumentation and control on electronically controlled engines communicating using the SAE J1939 Controller Area Network (CAN).

The PowerView™ displays over 30 standard SAE J1939 parameters broadcast by major engine and transmission manufacturer’s ECU’s. It also displays active faults and ECU-stored faults with a text description on the most common faults for diagnosing equipment malfunctions.



The MurphyLink™ M310 panel includes:
• Four (4) Analog gages: Oil Pressure, Engine Temperature, Voltmeter, Tachometer
• PowerView™ display, using the SAE J1939 controller area network
• Key switch
• Various throttle options available: Increment/Decrement, Run/Idle, Variable, Morse, No Throttle
• Three fuses
• Indicator lights (example: “Warning”, “Shutdown”, and “Wait to Start”, etc.)
• Deutsch connectors
• Shock mounted
• Space for two additional gages
• Black powder-coated enclosure

Available options:
• Mounting kits (surface or recessed)
• Enclosed or flat panel
• Standard harnesses available for most major engine manufacturers ECU's: 6' (1.8 m) & 12' (3.6 m)
• Extension harness
• Red emergency stop button

Literature

• Sales Bulletin (pdf)

TL7: Selectronic® Flasher Alarm Light and SAH: Mini-Siren

murphy.TL7_SAHThe Model TL7 is a panel mounted flashing alarm light and audible alarm driver. The TL7 helps protect the Murphy Swichgage® contacts from the very high in-rush current of the lamp. It is available in 12 or 24 VDC for negative ground systems. The TL7 Flasher/Light is used as a warning device on various types of industrial and mobile equipment.

The SAH Mini-Siren provides an audible alarm when fault conditions are detected by a Swichgage® instrument. It can be panel mounted and operates on 6–28 VDC. The Mini-Siren will give an audible warning when the TL7 operates, or it can be wired directly to the Swichgage® contacts for audible only alarm.


Features

• High Visibility Flashing Red Alarm Light or Audible Alarm
• 12 VDC or 24 VDC
• Panel Mount
• All Electronic


Literature

• Sales Bulletin (pdf)



 
© 2016  RJ Mann & Associates Inc.