Murphy by Enovation Controls
From plug-and-play to fully configurable control, our Murphy PowerCore Controller lineup satisfies a wide range of engines and applications. Looking for auto start or manual start? Various throttling options? Mechanical or electronic engine control? Our rugged IP67 rated controllers and panels are all final Tier4/Stage IV ready and are up to the task.
Murphy’s PowerCore TEC-10 panel provides full control of your engine including auto start/stop, auto throttling and display of both engine parameters and critical faults from the engine/application. The TEC-10 supports SAE J1939 CAN protocols for electronically governed engines as well as analog sensors on mechanical engines for fault and safety warnings/shutdowns.
The TEC-10 follows a standard operating sequence of 22 machine states that happen in a predetermined order. The machine states may be set to zero, if not needed, or adjusted to fit the application. Designed as a plug-and-play solution, the TEC-10 may utilize a free PC configuration tool that allows customers to change default settings as well as providing three levels of passcode protection. This flexibility allows for the same control panel to be used across a wide range of applications while providing operator consistency and familiarity.
The rugged TEC-10 panel may be mounted directly to the engine or engine/application cover. Built to endure industrial environments from full sun to wide temperature ranges, the panel features a high degree of sealing for dust and water as well as the ability to withstand high vibration.
Sales Bulletin - PowerCore TEC-10
1511783 rev. 2018/04/09
Sales Flier - PowerCore TEC-10
1511819 rev. 2017/01
PowerCore Product Family Brochure
1511752 rev. 2017/02
Murphy’s PowerCore MPC-10 Controller is a general, all-purpose manual/auto start and manual/auto throttling engine controller designed with rental applications in mind. The controller is purposed primarily for applications where a wide array of inputs and outputs are not required. It supports J1939 CAN protocols for electronically governed engines as well as I/O for mechanical engines for fault and safety shutdowns.
MPC-10 boasts three levels of menu security, perfect for rental fleet protection, which can easily be set with the configuration tool. The menu structure is incredibly user-friendly, with the ability to change many parameters and settings from the screen. While reprogrammable, the controller follows a standard operating sequence. This operating sequence is a set of 22 machine states that happen in a predetermined order. Machine states can be set to zero if not needed or adjusted to fit the application.
The MPC-10 controller is designed for all weather environments and is also available in the ML1000-4X panel solution.
Sales Bulletin - PowerCore MPC-10
1511718 rev. 2017/12/13
Sales Flier - PowerCore MPC-10
1511730 rev. 2017/01
PowerCore Product Family Brochure
1511752 rev. 2017/02
Custom Solutions Brochure
1411595 rev. 2017/03
The PowerCore MPC-20 controller features an out-of-the-box fully sealed industrial controller for various environments. The MPC-20 is Tier 4 / Stage IV ready with auto and manual start, various throttling options and a real-time clock. It is engineered for incredibly easy initial setup and is configurable by the user to meet the most versatile applications, allowing for quick uptime and less headaches on the manufacturing floor or in the field.
Easily viewable in full-sun conditions, the MPC-20 has a large 3.8-inch [97 mm] QVGA Monochrome LCD. The controller is capable of handling sophisticated engine diagnostics whether installed on a mechanical or electronic engine. Although a configuration tool is not required, the easy-to-use PowerVision Configuration Studio software allows configuration of set points on a PC to save for future loading.
The MPC-20 is targeted at pumping and irrigation applications but can be used in many other applications requiring an auto or manual start controller. It is IP67 rated to withstand harsh environments and is also available in an ML2000 panel solution.
Sales Bulletin - PowerCore MPC-20
1411425 rev. 2017/05/04
Sales Flier - PowerCore MPC-20
1311409 rev. 2018/01
PowerCore Product Family Brochure
1511752 rev. 2017/02
Custom Solutions Brochure
1411595 rev. 2017/03
The Cascade auto-start controller is designed to fit any engine-driven application requiring a simple and robust automatic start and stop sequence. Pumps, compressors, grinders, power units and generators are just a few of the industrial applications for the controller. The Cascade controller is fully compatible with all major engine types. Whether you are running mechanical or J1939 engines, the controller will work with your application.
The controller is encapsulated to protect it against dirt, water and dust, along with a compression gasket to fully seal it to the panel. It is rated NEMA4 and IP65, and operates in total blackout for a minimum of two seconds. The Cascade accepts MPU, AC Frequency and ECU speed signals. Inputs and outputs are ruggedly protected and fault tolerant. The controller works directly with Murphy’s J1939-ready PowerView gages. Just plug and go. No sender is required.
Additionally, the Cascade Configuration Tool allows quick setup and loading of parameters into a standard Cascade via a PC software tool.
Sales Bulletin - Cascade Controller
05195 rev. 2014/10/30
Installation & Operations Manual - Cascade CD101
00-02-0594 rev. 2016/02/19
Installation & Operations Manual - Cascade Configuration Tool
00-02-0724 rev. 2011/01/25
The EMS Pro is a dedicated microprocessor-based, single-engine controller. It is a flexible all-in-one customizable unit that meets the needs of engine-driven pumping equipment applications. It offers field-adjustable operating parameters that can be changed without the need for a computer. It is also able to support both mechanical and J1939 electronic engines.
The EMS Pro has selectable auto start/stop features with several throttling options. The auto start/stop options (single contact, floats, momentary, transducer and clock) are available at the touch of a button. The transducer start/stop option includes three settings: pressure, level and temperature. In addition, there are many performance-enhancing features, all of which are available through an operator interface that is easy to learn and use. This controller has the ability to withstand a wide ambient temperature range, comes standard in a NEMA 4 rated enclosure and is secured by four rubber shock mounts. Inside is a backlit graphical display that is visible day or night in all conditions.
The EMS Pro is ideal for use with a remote modem or in a SCADA system offering MODBUS RTU protocol on either the RS232 or RS485 port.
Sales Bulletin - EMS Pro
1010554 rev. 2014/10/23
EMS Pro Brochure
1010643 rev. 2011/10
The EMS Pro Lite is a customizable pump controller designed specifically for dewatering and irrigation applications. This versatile unit supports both mechanical and J1939 electronic engines, thus eliminating the need to stock multiple controllers. A step ahead, the EMS Pro Lite is Tier 4 and Stage IIIB/IV ready. The user-friendly operator interface is a responsive eight-button membrane keypad and backlit graphical display mounted directly to the front of a rugged NEMA 4 enclosure for easy access and operation.
This microprocessor-based controller’s operating parameters are field adjustable without the need for a computer. However, the EMS Pro Lite can be modified for use with a remote modem or in a SCADA system with MODBUS RTU protocols on either an RS232 or RS485 port. The robust EMS Pro Lite is engineered for 12 VDC systems (8 VDC minimum to 14.4 VDC maximum) and a wide operating temperature.
The EMS Pro Lite features a compact enclosure and focused feature set, including pressure, level and float start/stop types for the ideal balance of functionality and control needed to perform specific application functions.
Sales Bulletin - EMS Pro Lite
1110770 rev. 2014/10/21
Sales Flier - EMS Pro Lite
1110855 rev. 2016/04
Murphy’s Keystart 9620 and 9621 control modules provide manual start/stop and automatic fault protection for generators, pumps and other engine-driven applications. Outputs allow control of engine fuel (energized to run), starter motor and preheat. The Keystart also has an alarm output for remote or audible warning of faults. Six LEDs and icons indicate engine status and faults. Four switch inputs (closing to negative on fault) enable automatic shutdown on engine low oil pressure, high coolant temperature and auxiliary faults.
Model 9621 has a fully adjustable engine overspeed shut-down feature, configurable for either generator AC or magnetic pickup speed signals. Charge alternator excitation and a charge fail warning LED are standard. Electrical connection is by quick-connect, spring-clamp terminal blocks. A universal 7 to 30 VDC power supply permits operation with 12 or 24 VDC engine batteries, with standard engine crank-dip voltage protection.
Keystarts are mounted in the front through a standard cutout and secured at the rear with quick-fit clips. Epoxy resin case encapsulation gives superior vibration/ shock resistance and environmental protection.
Sales Bulletin - Keystart 9620 Series
0810288 rev. 2016/09/22
Installation Instructions - Keystart 9620/9621
00-02-0657 rev. 2015/04/22
